Instructions

www.blaupunkt.com
A12C
27
The device gets very
warm, is loud or loses
power
•
Check the air inlets and air filters for dirt. Remove external dirt.
• From the outside, check the device for dirt. If the inside of the
device is dirty, have it cleaned by a specialist company for
cooling and air conditioning.
The device does not
respond to the
infrared remote
control
•
Check whether the distance between remote control and
device is too large and reduce, it if necessary.
• Make sure there are no obstacles, such as furniture or walls,
between the device and the remote control. Ensure visual
contact between device and remote control.
• Check the charging status of the batteries and change them, if
required.
• If the batteries have only just been changed, check them for
correct polarity and change them, if required.
Wait for at least 3 minutes after maintenance and repair work. Only then switch the device
back on.