Instructions

www.blaupunkt.com

Switch the unit of temperature

• Hold on “A" and ” V” button three seconds by the same time, then you can change the

unit of temperature.

• For example:

• Before change, in cool mode, the screen display like fig1.

• After change, in cool mode, the screen display like fig2.

Fig 1 Fig 2

• The following functions are optional. Please refer to the real object, just because these

functions only belong to some model.

IONIZER FUNCTION:

• •Hold on “Fan” and “Timer” button about 3 seconds, the ionizer function can be open

or closed.

• When this function is open, the “Ionizer” symbol on the operation panel will be

lightened. Attention: only the fan motor work, the ionizer function can be started.

USB CHARGING FUNCTION

• • The USB charging function can be open or closed when you long press the wind

speed key for around 10 seconds.

• Press the “FAN” button about 10 seconds, the USB charging function can be open or

closed.

• If this function is open, the machine will “beep” once, and when you close this function,

the machine will “beep” twice.

WIFI FUNCTION:

• •In the stand-by, press “ ” button six times in four seconds to reset the Wifi signal, so

that the appliance will “beep” twice.

• Then please refer to Wifi connection specification to connect the appliance. If it is

successful, the Wifi indicator light on operational panel will be lightened.