Instructions

www.blaupunkt.com
20
DRY MODE
• Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
Before using the dry mode, the appliance should be prepared in the same way as for
cool mode, with the air exhaust hose attached to enable the moisture to be discharged
outside.
• To set this mode correctly:
• Press the “ " button a number of times until the “Dry” symbol
light appears, the screen will appear ‘’ ’’ ;
• In this mode, fan speed is selected automatically by the appliance.
SETTING THE TIMER
• This timer can be used to delay the appliance start up or shutdown, this avoids wasting
electricity by optimizing operating periods.
PROGRAMMING START UP
• Turn on the appliance, choose the mode you desire, for example cooling, 24°C and
high fan speed. Turn off the appliance.
• Press the button, the screen will display 1-24 hours.
• Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then “Timer” symbol is displayed on screen.
• Press again the “ ’’button, the timer will be canceled, and the ’’Timer” symbol will
disappear from screen.
PROGRAMMING SHUT DOWN
• Under the running of appliance, please press the button, the screen will display 1-24
hours.
• Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then “Timer” symbol is displayed on screen.
• Press again the “ ’’button, the timer will be canceled, and the ’’Timer” symbol will
disappear from screen.