Operation Manual
18
EN
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and 
respect the following warnings before the 
appliance is operated:
  This TV with the weight of more than 20 kg must be lifted 
and carried by at least two people.
  Be careful! This TV does not contain any parts which could be 
repaired by the user. In case of a fault, contact the producer 
or the authorized service. The contact with certain parts 
inside the appliance might endanger your life. The guarantee 
is not provided for the faults caused by non-professional 
interactions!
  Do not remove the rear part of the appliance.
In order to prevent  re 
spread, always keep candles
and other open  ames away
from this product.
  This appliance is designed for receiving and reproduction of 
video and sound signals. Any other use is strictly forbidden.
  The ideal distance to watch TV is approximately  ve times 
longer of the diagonal of the screen The light striking upon 
the screen from other light sources can cause re ections and 
make the quality of the picture worse.
  Please, ensure the su  cient ventilation and appropriate 
distance of the appliance from other pieces of furniture.
  Install the product at least 5cm from the wall for ventilation.
  The TV set is designed to be used in moderate climate.
  The TV set is designed exclusively for the operation in a dry 
place. When using the appliance outside, please, make sure 
it is protected against moisture (rain, splashing water). Never 
expose the appliance to moisture.
  Do not place any containers with water on the appliance, 
such as vases, etc. These containers might get pushed over, 
which would endanger electric safety. Place the appliance 
exclusively on  at and stable surfaces. Do not place any 
objects such as newspaper or blankets, etc. on or under the 
appliance.
  Make sure the appliance does not stand on any power 
cables as they might get damaged. Mobile phones and other 
devices such as WLAN adapters, monitoring cameras with 
wireless signal transmission, etc. might cause electromag-
netic interference and they should not be placed near the 
appliance.
  Do not place the appliance near heating elements or in 
a place with direct sunshine as it has a negative e ect on 
cooling of the appliance. Heat storage is dangerous and it 
can seriously reduce the lifetime of the appliance. In order to 
ensure the safety, ask the quali ed person to remove the dirt 
from the appliance.
  Try to prevent the mains cable or (if it is part of delivery) 
mains adapter damage. The appliance can only be connected 
with a supplied mains cable/adapter.
  Storms are dangerous for all electric appliances. If the mains 
or aerial wiring is struck by the lightening, the appliance 
might get damaged, even if it is turned o . Thus you should 
disconnect all the cables and connectors of the appliance 
before the storm.
  To clean the screen of the appliance use only a damp and soft 
cloth. Use only clean water, never detergents or in no case 
dissolvents.
Warning:
  Never connect any external devices to a live appliance. 
Switch o  not only the TV but also the devices which are 
being connected! Plug the appliance plug into the wall outlet 
after connecting the external devices and the aerial!
  Always make sure there is free access to the appliance main 
switch and to its mains plug.
  The appliance is not designed for a use in a workplace  tted 
with monitors.
  The systematic use of headphones at high volume might lead 
to irreversible hearing damage.
  Ensure environmental disposal of this appliance and any 
components including batteries. When in doubt, please, 
contact your local authority for details of recycling.
  While installing the appliance, do not forget that furniture 
surfaces are treated with various varnishes, plastics, etc. or 
they might be polished. The additions contained in these 
products might cause destruction of base material of appli-
ance stand. This will result in the holdovers of this material 
stuck to the furniture surface, which are di  cult to remove, if 
not even impossible.
  The screen of your TV responds to the top quality require-
ments and it was checked in details for accidental faulty 
pixels several times. Due to the technological properties of 
the manufacturing process, it is not possible to eliminate the 
existence of a small number of faulty points on the screen for 
100% (even with maximum care while production provided). 
These faulty pixels are not considered faults in terms of 
guarantee conditions, if their extent is not greater than the 
boundaries de ned by DIN norm.










