Operation Manual

B 9e
Alarm operation
-Press the “AL1” on the remote control to open and close the ALARM function
-Long press the “ALARM1” button on remote control for 2-3 seconds to display the “ALARM
1”, at this time the “hour” will flash on the display, press. “ Button” or “  Button” to select
your desired hour, then press the “ALARM1” to confirm it
-At this time the “minute” will flash on the display, press “ Button” or “  Button” to
select your desired minute, then press the “ALARM1” to confirm it
-Select “BUZZ” or “Radio” “CD” “USB” or “SD” for alarm sound, press the “ALARM1” to
confirm it
-Adjust the volume to your desired volume, and then press the “ALARM1” to confirm it. The
ALARM function for “ALARM2” is same as the “ALARM1”
MP3 link operation
Sleep operation
90 min, 80 min, 70 min, 60 min, 50 min, 40 min, 30 min, 20 min,
10 min, OFF)
Specifications
Frequency Range: FM 87.5 - 108 MHz
Power Sources: 120V~60Hz 230V~50Hz 12W or 6 x DC1.5V ‘C’ (UM-2) Batteries (Not
included)
General
Power Supply: AC230V ~ 50Hz
Power Consumption: 12 W
Power Consumption in standby mode < 1W
Output Power: 2 x 1.8W
Unit Dimensions: 280 x 212 x 151 mm
Unit Weight: 1.36 kg
This CD features an MP3 LINK jack for connecting your iPod, MP3 player or other digital
music player.
1.Connect the 3.5 mm min jack of your external device to the MP3 LINK jack located on the
rear side of unit (The connection cable is not included).
2.Turn on the unit and press function button select to AUX IN mode once an external
device is plugged into the MP3 LINK jack.
3.Start to play your iPod, MP3 player or other external audio device.
4.Slowly adjust both volume controls unit and your external device.
5.Turn off your iPod, MP3 player and etc. when finish listening. Turn the unit off first, then
unplug the AUX IN jack.
1. Press the STANDBY BUTTON to power off
2. Sleep time selection: In sleep open state, every click "sleep" ,sleep time will decrease
progressively 10 minutes (
46