Operating instructions

B 30e
45
USB Operation
1. Set the FUNCTION button to CD/MP3/USB/AUX
button for about 2 seconds to enter the USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks
stored in the USB.
3. The unit will start auto play after reading. The playback starts from track 1, the
PLAY indicator would show on the display.
To pause playback, press the /PAIR button. The PLAY indicator and the current play
time will flash on the display. To resume playback, press the /PAIR button again.
4. Press the STOP/DISC/USB button to stop playing. The display will show total number
of USB and STOP.
5. Proceed repeat play (repeat 1- repeat folder - repeat all)/program play/skip next
and back operation as described in aboveCD/MP3 OPERATION.
CAUTION:
Do not use any USB extension cable for connecting the USB device to avoid any
conflict.
MP3 Link Operation
1. Set the FUNCTION switch to CD/MP3/USB/AUX position.
2. Connect the audio cable into the MP3 LINK jack and the other end connects to the
AUDIO OUT jack of the external audio source. The unit will change to AUX mode
automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
Bluetooth Operation
1. Set the FUNCTION switch to BLUETOOTH function, the LCD will display and the
light will flash at high speed.
2. Turn on the Bluetooth function on mobile, scan the device Blaupunkt B30e” and
connect, then input the password 0000 if required, the light will light up to indicate
connection done. Press Play button on mobile to start playback. If the unit can't connect
the relative Bluetooth within 2 minutes, the indicator light will flash each 2'nds. Then
press the PLAY/PAUSE/PAIR button to reconnect.
3. Adjust the volume of the main unit to your desired level.
4. Press and hold the PLAY/PAUSE/PAIR button on remote control to disconnect
Bluetooth.
Note: The Bluetooth works best within a range of 8-10 meters.
position, press the STOP/DISC/USB
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by M3 Electronic GmbH is under license. Other trademarks
and trade names are those of their res ective owners.
®