Operation Manual

79
Setting date and time
You can set the date, the time format (12/24 hours) and the time.
In audio sources, the time is displayed at the bottom right of the
monitor.
1. Touch the
Setup
Setup
button on the touch screen menu.
2. Sequentially touch the
, and button.
3. Touch the
button.
✔ The “Adjust Date & Time” USER submenu is displayed.
EXIT
EXIT
NEXTNEXT
Adjust Date & Time
Adjust Date & Time
YEAR
YEAR
MONTH
MONTH
44
20052005
DAY
DAY
FORMAT
FORMAT
1414
24H Style24H Style
4. Select “YEAR”, “MONTH”, “DAY”, “FORMAT”, “HOUR” or
“MIN” by touching it. The
/ buttons can be used to
scroll back and forth in the menu.
5. Perform the setting by repeatedly touching the
or
button.
6. Touch the
EXIT
EXIT
button to confirm the setting.
7. Repeat steps 4 - 6 to perform additional settings, or
7. touch the
EXIT
EXIT
button to exit the menu.
Selecting the external signal source
In the setup menu you can configure whether you want to display
the image of a connected back-up camera as horizontal mirror.
For this purpose, the back-up camera must be connected to the
device as described in the installation instructions.
Two external audio/video sources can be connected to the AUX
inputs of the Aspen/Chicago IVDM-7003. If the AUX inputs are
activated, they can be selected as signal source.
You have the option of selecting different signal source for the
front and the rear of the vehicle. This allows the driver to listen to
the radio or another audio source while the rear passengers can
view a DVD by means of additional connected monitors and head-
phones.
The following settings are possible:
Mirroring the camera image while backing up
REVERSE: ON > OFF
Switching AUX inputs on/off
AUX 1/2: ON > OFF
Selecting the signal source for additional monitors
MONITOR 1/2: AUTO > DISC > RADIO > CDC > AUX1 > AUX2
USER setup menu
BA IVDM-7003 Teil 3 GB 03.02.2006, 8:35 Uhr79