Operation Manual

54
External sources
Add-on equipment
Two external audio/video sources can be connected to the AUX
inputs of the Aspen/Chicago IVDM-7003. If the AUX inputs are
activated in the setup menu, they can be selected as signal source.
For further details, please read the section “Selecting the exter-
nal signal source” in the chapter “Setup menu”.
Alternatively, the signal converter IVSC-3302 or IVSC-5502
can also be connected to the Aspen/Chicago IVDM-7003. The
IVSC signal source can be used to display all the sources
connected to the signal converter on the monitor of the Aspen/
Chicago IVDM-7003.
Note: If a signal converter is connected to the device,
the buttons of the signal sources AUX 1 and AUX 2
are no longer available on the touch screen menu. In
this case, it is meaningful to connect all external sourc-
es to the signal converter and selected them via the
signal converter. However, if a device should be con-
nected to the AUX inputs, you ca select it with the SRC
button on the device or on the remote control.
Selecting a connected device as signal source.
1.
On the monitor: Touch the button of the desired signal
source on the touch screen menu.
On the device and on the remote control: Press the SRC
button until the desired signal source appears on the
monitor.
✔ The selected AUX source is briefly displayed at the top of
the monitor.
AUX1
Brief AUX display with closed monitor, then display of
the time.
BA IVDM-7003 Teil 2 GB 03.02.2006, 8:34 Uhr54