Operation Manual

Theft protection

Activating the device code

In addition to a detachable control panel, the device is equipped

with a four-digit device code. The device code is set to 0000 at

the factory. With this setting, the coding is not active and the de-

vice can be switched on without code query after a voltage inter-

ruption.

To activate the coding of your device, you must enter a freely

selectable code. How to change the code is described in the chap-

ter “Setup menu” under “Changing the password”.

Note: Record your personal code and keep it in a safe

place. If you ever forget the code, the device cannot

be switched back on after a voltage interruption. In

this case, the device must be decoded by returning it

to a local dealer or sending it to our customer service

department.

Switching on coded devices after a voltage interruption

If a coded device is switched on after disconnecting the battery

voltage, e.g. in case of a repair to the vehicle, the code query

appears.

PASSWORD

1. Enter the four-digit code using the number buttons 0 to 9

on the remote control.

2. Press the

button to correct any incorrect entries.

3. Confirm the entry with the ENTER button.

✔ The device switches on.

BA IVDM-7003 Teil 1 GB 03.02.2006, 8:32 Uhr19