Operation Manual

20
Choosing the display mode
When playing CDs, you may select the dis-
play mode:
“DISC NO”–The number of the CD cur-
rently being played is dis-
played.
“NAME”–The name entered (e.g.,
Madonna) will be displayed
(only the Alaska RDM 168).
“TIME”–The number of minutes the
title has already been play-
ing (e.g., 2:32) is displayed.
To change the display mode
The display mode can be changed in the
DSC menu (see “Programming with DSC-
CD DISP”).
The factory setting for the display mode is
TIME.
The display mode is briefly indicated and
then the respective value is displayed (e.g.,
“TIME,” “2:32”).
If you select NAME and the CD does not
have a name, the display will remain in the
TIME mode.
For more information about this you should
also read the section “Naming CDs”.
• Select the desired CD by pressing
/ .
• Press << >> to set the mode CD
NAME EDIT MODE.
If the CD has not yet been named 8 spaces
will appear in the display. The first space
will blink.
• Press
or and select the letter, the
number or an empty space.
To select an empty space, select the
symbol “_”.
• Press << or >> to set the next charac-
ter.
• Press the DSC key to store the name.
The display will return to the mode
CDC NAME.
• Repeat this procedure to name an ad-
ditional CD.
• If you would like to leave this mode en-
tirely, press the DSC key.
To change a CD name:
If you would like to change an existing name,
follow the steps under “Starting CD name
input”.
Naming CDs
Note: The following functions can only
be activated on the Alaska RDM 168.
You can name CDs. This name (e.g., MA-
DONNA) will appear in the display once you
select the display mode “CD NAME” in the
DSC menu.
If your radio has a built-in CD player you
can name up to 30 CDs. When you insert
one of those CDs, the unit recognizes the
CD and displays its name if this display func-
tion has been selected in the DSC menu.
You can name up to 99 CDs when you are
using a CD changer. When playing one of
those CDs through the CD changer, the unit
recognizes this CD and displays its name if
this display function has been selected in
the DSC menu.
Starting CD name input
Select “CD player” or “CD changer” with the
SRC key and insert a CD if necessary.
• Press the DSC key repeatedly until
“CD/CDC NAME” appears in the dis-
play.
• Press << >> to set the modus CD
NAMING.
A CD number or a CD name will be diplayed.
1.BA Alas,Flori,Neva168 gb 08.06.2000, 12:03 Uhr20