Owner`s manual

GB 4
Connecting Additional Amplifiers or an Equalizer to the Receiver’s Preamp Output
Obtain the Blaupunkt RCA 4-channel preamp output adapter 7 607 893 093 from your dealer.
It includes a blue/white trigger lead for switching the amplifier on and off. Connect the adapter into
the top left section of the connector block on the back of the receiver. (See Fig. 7) Follow the
amplifier’s or equalizer’s instructions regarding connection. (Blaupunkt amplifiers available sepa-
rately).
+12V
+12V
10A
Fig. 7
CD CHANGER OR AUX-IN CONNECTION
(Arizona, CM 148, Colorado CM 168, Nevada RDM 168, & Alaska RDM 168 Receivers)
CD Changer Connection
These receivers can control a Blaupunkt CDC-A08 or CDC-A071 CD Changer (or with the adapter
harness 7 607 889 093, they can control a Blaupunkt CDC-A05 CD Changer)
(All available separately.) The changer cable plugs into the right top connector block on the back of
the receiver. (See Fig. 6) See the changer instructions for details.
rt
br
3A
+12V
1
2
V
10A
Fig. 6
Aux Input
If a changer is not connected, you can connect portable audio equipment to your receiver by
purchasing Blaupunkt accessory harness 7 607 897 093. It connects to the right top block on the rear
of the receiver. It includes a 2-meter aux-in cable with a 3.5 mm male plug for direct insert into your
portable equipment.
WIRELESS REMOTE CONTROL
(Colorado CM 168, Nevada RDM 168, & Alaska RDM 168 only)
This receiver’s most-frequently used features can be conveniently controlled from the steering
wheel with Blaupunkt’s unique Thummer III Steering-Wheel Remote Control. (Available separately.)
The Thummer III includes a receiving “eye” that can be placed virtually anywhere on the dash, which
connects into the center top block on the back of the receiver.