Operation Manual

21
ACR 4250 GB
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tape operation
Inserting a tape
• Turn on the set.
• Insert a tape.
Insert the tape with side A or 1 showing up,
the open side facing to the right.
= Press to eject the tape.
The tape will be played in the direction used
last.
“TR1-PLAY” in the display means that track
1 or A is being played.
Removing a tape
• Press .
The cassette will eject.
Fast winding
Fast Forward
• Press FF (Fast forward).
At the end of a tape side, the mech-
anism changes directions automatically
to play the other side.
Automatic seek tuning start
Prerequisite:
The priority for traffic announcements has
been activated.
When leaving the reception area of the tuned
in traffic programme station while listening to
a tape or after having turned down the vol-
ume completely, the system will automati-
cally start searching for a new TA programme.
If no such station is found within approxi-
mately 30 seconds, tape operation will be
stopped and a warning beep will sound. To
switch the warning beep off, proceed as
described above.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory.
Stopping Fast Forward operation
• Press FR (Fast rewind).
Fast Rewind
• Press FR.
At the beginning of the tape, the mech-
anism will automatically start playback.
Stopping Fast Rewind operation
• Press FF.
Fast winding
FR: Fast rewind; stop by pressing FF.
FF: Fast forward; stop by pressing FR.
Changing the tape direction
(Autoreverse)
To switch to the other side of the cassette
tape during playback:
• Press both the FR and FF buttons
simultaneously.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (Autoreverse). The display shows
“TR1-PLAY” for track 1 or A, or “TR2-PLAY”
for track 2 or B.