Owner's Manual

Now you can enter the new PI N:
... Enter the number sequence by press-
ing the corresponding buttons of the
keys@.
After entering one digit, the device auto-
matically switches to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch <
or>@again.
After entering the complete new PIN
number,
... press the OK button 0.
The new entry is stored.
Changing the Bluetooth name of
the device (RAD NAME)
The Bluetooth name of the device under
which it is displayed by other Bluetooth de-
vices is set to "BLAUPUNKT BTl at the facto-
ry. To change this name,
... open the Bluetooth menu .
... Press the rocker switch /\ or ~ @ until
the "RAD NAME" menu item is selected .
... Press the OK button 0to call up the
menu item.
You can now enter a new Bluetooth name:
... Enter the name by pressing the corre-
sponding buttons of the keys @. Select
the desired letter, if necessary by press-
ing a button several times.
After entering one letter, the device auto-
matically switches to the next one. To cor-
Bluetooth phone call
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch < or
>@again.
After entering the complete name,
... press the OK button 0.
The new Bluetooth name is stored.
49