Owner's Manual

Tuner mode
Changing the seek tuning
sensitivity (SENS)
The seek tuning sensitivity determines
whether the automatic station seek tuning
locates only strong stations or also weaker
stations. You can adjust the seek tuning sen-
sitivity separately for the FM and AM wave-
bands.
.... Select the waveband for which you want
to set the seek tuning sensitivity.
.... Press the MENU button 0.
The Tuner menu opens. The "SENS" func-
tion is selected.
.... Press the OK button 0 .
.... Press the rocker switch < or > ® to ad-
just the sensitivity between "SENS LOW
1" (lowest sensitivity) and "SENS HIGH
6" (highest sensitivity) .
....
Press the OK button 0 to select a dif-
ferent function. or press the DIS-ESC
button @ to exit the menu.
Scanning all receivable stations
(BANDSCAN)
You can scan all receivable stations of a
waveband. The scan time can be set as de-
scribed in the chapter "User settings" .
....
Select the waveband (FM. AM) whose
receivable stations you want to scan .
....
Press the> rocker switch ® to open
the "Tune" menu.
The "SEEK" function is selected .
....
Press the rocker switch 1\ or ~ @ to
select the "BANDSCAN
II
function.
22
"BAND SCAN" briefly appears on the dis-
play.
.... Press the OK button 0.
"SCAN" and the current frequency appear
on the display.
The tuner is searching for stations. As soon
as the tuner has located a station. it is
played .
To continue listening to the currently
scanned station •
....
press the OK button 0.
After a complete search of the frequency
band, scanning stops. The previously set
station is played .