Owner's Manual

Startup
Inserting and removing a CD
A CAUTION!
l_.. _~ Damaging the CD drive
Labelled or shaped CDs can damage the CD
drive.
• Do not insert any mini CDs (8 cm diame-
ter) or shape CDs damage.
• Insert only circular CDs with a 12-cm
diameter.
• Do not attach labels to CDs since the
label may detach during operation.
Note:
Label CDs only by using a marker since
it does not contain any caustic materials.
Permanent markers can damage CDs.
~ Press the!] button CD.
The control panel opens.
~ If a CD is in the drive, press the'
button@.
The CD is ejected.
~ Remove the CD.
If you do not remove the CD, it is automati-
cally pulled in again after a few seconds.
~ Insert the CD with its printed side up-
permost into the CD drive@ until you
feel some resistance.
The CD is automatically drawn in.
~ Close the control panel.
The display briefly shows "READING". Next,
the following appears:
18
• The audio CD display if an audio CD is
inserted.
• The MP3 display if an MP3 or WMA CD
is inserted.
The CD starts playing.
Selecting the CD as audio source
You can select an inserted CD as audio
source:
~ Press the SRC button ® repeatedly
until "CD" (for audio CD) or "MP3" {for
MP3 CD} appears on the display.
Note:
The CD mode can be selected only if a
readable CD is inserted.
To operate the audio CD disptay, please read
the chapter "CD mode (audio}".
To operate the MP3 display, please read the
chapter "CD/USB mode (MP3/WMA}".