Operating Instructions and Installation Instructions

42
10
25
Important information
Electrical connection
The appliance is tted with a plug and must only be connected to a properly installed earthed socket.
Only a qualied electrician who takes the approriate regulations into account may install the socket
or replace the connecting cable. If the plug is no longer accessible following installation, an all-pole
isolating switch must be present on the installation side with a contact gap of at least 3 mm. Contact
protection must be ensured by the installation.
* 20 mm for metal fascias
Fully insert the appliance and centre it.
Do not kink the connecting cable.
Screw the appliance into place.
The gap between the worktop and the appliance must not be closed by
add tional battens.