Operating Instructions and Installation Instructions

40
IMPORTANT INFORMATION ABOUT INSTALLING
• This appliance is NOT intended for use in a commercial environment.
• Please observe the installation instructions provided and note that this appliance should only be
installed by a quali ed technician.
• The appliance is tted with a plug and must only be connected to a properly installed earthed
socket.
• In case a new socket is needed, installation and cable connection must only be done by a quali
ed electrician. If the plug is no longer accessible following installation, a pole disconnecting
device must be present on the installation site with a contact gap of at least 3 mm.
• Adapters, multiway strips and extension cords must not be used. Overloading can result in re.
• If the appliance is not tted with a supply cord and a plug, the connection equipment must have
a contact separation in all poles that provide full disconnection, and the appliance must be
incorporated in the xed wiring in accordance with the wiring rules.
The accessible surface
may be hot during
operation.