Operation Manual

PowerBoost function en
15
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. Touch the r symbol repeatedly until the V
indicator lights up. ‹‹ lights up in the timer display.
2. Set the desired time in the control panel.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the r symbol repeatedly until the V indicator
lights up.
Change the time in the control panel or set ‹‹ to delete
the set time.
When the time has elapsed
An audible signal sounds. ‹‹ and the V indicator flash
in the timer display. The displays go out after 10
seconds.
When you touch the r symbol, the displays go out and
the audible signal ceases.
vPowerBoost function
Po we r Boo s t function The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
› and Š will flash in
the display for the selected hotplate; the
Š heat setting
will then be set automatically without activating the
function.
Note: In the combi zone, the PowerBoost function can
only be activated if the two hotplates are used
independently of each other.
Activate
1. Select the hotplate.
2. Touch the Õ symbol.
The › indicator lights up.
The function has now been activated.
Deactivating
1. Select the hotplate.
2. Touch the Õ symbol.
The › display goes out and the hotplate switches
back to the Š heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.

