Operation Manual

en Appliance door

:Warning

Incorrect assembly!

Never move the rail before the two hooks are

secured fully in the upper holes. The enamelled

coating may be damaged and break (fig. C).

2. Both hooks must be inserted fully into the upper

holes. Now move the rail down slowly and carefully

and hook it into the lower holes (fig. D).

3. Hook both rails into the side walls of the oven

(fig. E).

If the rails are fitted correctly, the distance between the

two upper shelf positions is greater.

qAppliance door

Ap p l i a n c e door

With good care and cleaning, your appliance will retain

its appearance and remain fully functional for a long

time to come. This will tell you how to remove the

appliance door and clean it.

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels,

you can detach the oven door.

The oven door hinges each have a locking lever. When

the locking levers are closed (figure A), the oven door

is secured in place. It cannot be detached. When the

locking levers are open in order to detach the oven

door (Fig. B), the hinges are locked. They cannot snap

shut.

:Warning – Risk of injury!

Whenever the hinges are not locked, they snap shut

with great force. Ensure that the locking levers are

always fully closed or, when detaching the oven door,

fully open.

Detaching the door

1. Open the oven door fully.

2. Fold up the two locking levers on the left and right

(figure A).

3. Close the oven door as far as the limit stop. With

both hands, grip the door on the left and right-hand

sides. Close the door a little further and pull it out

(figure B).

(