Operation Manual

en Rails

pRails

Rails

With good care and cleaning, your appliance will retain

its appearance and remain fully functional for a long

time to come. This will tell you how to remove the

shelves and clean them.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must

have cooled down.

Unhooking the rails

1. Hold the bottom of the rail and pull it towards you a

little. Pull the extension pins at the bottom of the rail

out of the fastening openings (fig. A).

2. Then remove the complete frame by first pulling it

downward and then forward (fig. B).

Clean the rails with cleaning agent and a sponge. Use a

brush to remove stubborn dirt deposits.

Hooking in the rails

1. Place the two hooks at the top of the rail into the

upper holes. (Fig. A-B)

:Warning

Incorrect assembly!

Never move the rail before the two hooks are

secured fully in the upper holes. The enamelled

coating may be damaged and break (fig. C).

2. Both hooks must be inserted fully into the upper

holes. Now move the rail down slowly and carefully

and hook it into the lower holes (fig. D).

3. Hook both rails into the side walls of the oven

(fig. E).

If the rails are fitted correctly, the distance between the

two upper shelf positions is greater.

(