Operation Manual

Operating the appliance en
13
1Operating the appliance
Oper at i ng the appl i ance You have already learnt about the controls and how
they work. Now we will explain how to apply settings on
your appliance.
Switching the appliance on and off
Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.
Setting the heating function and temperature
It is very easy to apply the settings you require to your
appliance using the function and temperature selector.
In the heating function table, you will find the optimal
heating functions for all kinds of food.
Example in the picture: Top/bottom heating B at
190 °C.
1. Use the function selector to set the heating function.
2. Use the temperature selector to set the temperature
or grill setting.
The oven will start heating after a few seconds.
To switch off the oven, set the function selector to the
"Off" position (zero).
Note: The cooking time and the end time can also be
set on the appliance.~ "Time-setting options"
on page 14
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Only use rapid heat-up when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until rapid heat-up is
complete.
1. Set the function selector to D.
2. Use the temperature selector to set the temperature.
The oven will start heating after a few seconds.
Once rapid heat-up is complete, an audible signal will
sound. Place your food into the cooking compartment
and set the heating function and temperature.
Then, for best results, use:
■ 9 3D hot air
%

&