Operating Instructions and Installation Instructions
28
28
28
10. Note
1> The oven lamp will be on for all functions.
2> Once the cooking programme has been set and the" " button is not pressed within 5 minutes,
the current time will be displayed or turn back to waitting state. The setting program will be invalid.
3> The buzzer will sound once when effectively pressed, if not effectively pressed there will be no response.
4> The buzzer will sound five times to remind you when cooking has finished.
Note:
1. Lamp, defrost, probe can't be reserved.
2. During the status of reservation, press cancel button once, time and temperature of reservation menu
will be shown with menu icon lighting constantly. Press again, screen returns to clock, or press start button
to return to reservation status.
3. Reminder function is invalid during reservation status.
28
28
10. Note
1> The oven lamp will be on for all functions.
2> Once the cooking programme has been set and the" " button is not pressed within 5 minutes,
the current time will be displayed or turn back to waitting state. The setting program will be invalid.
3> The buzzer will sound once when effectively pressed, if not effectively pressed there will be no response.
4> The buzzer will sound five times to remind you when cooking has finished.
Note:
1. Lamp, defrost, probe can't be reserved.
2. During the status of reservation, press cancel button once, time and temperature of reservation menu
will be shown with menu icon lighting constantly. Press again, screen returns to clock, or press start button
to return to reservation status.
3. Reminder function is invalid during reservation status.
10. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
1> Rotate „ K1 „ to select the pyrolytic function. LED will display „ PYR „.
2> Press „ “ to conrm the cooking. And the default time is 2 hours, „ PYR „ will display on the
LED. 3> Rotate „ K1 „ to change the pyrolytic time. The timer can be set 1:30 or 2:00 hours.
Note:
A) When the oven door is not closed, pressing start button will be invalid, LED display „ DOOR „,
„ PYR „.
B) When the oven‘s center temperature is highter than 320°C, pressing start button will be invalid.
The LED will display „ COOL „ and „ PYR „. When the oven‘s center temperature is lower than
200°C, press cancel button once , it will pause; press again, it will return to waiting state. If
highter than 200°C, press cancel button once, it will return to waiting state directly.
C) Open the door when the oven is working, the LED will display „ DOOR „ and the buzzer will
sound continuously until the door was closed or press cancel button.
D) Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure
that oven is empty. Do not leave anything inside it (e.g. pans, baking tray, dripping pan, slider
bracket etc.) as this could heavily damage them.
E) When nished pyrolytic cleaning, don‘t interrupt the power in an hour.
11.