User guide

8
Attaching the stand
Attaching the Stand
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a  at and clean surface with the panel facing downwards to avoid damage.
( g.1) Attach the stand neck to the rear of the TV set. ( g.2) Secure the neck to the TV using the 5 x ST(4x12)
screws provided.
( g.3) Attach the stand base to the neck. ( g.4) Secure the base to the neck using the 4 x ST(4x16)
screws provided.
11/2
3
5 x ST(4x12)
1
2
4
4 x ST (4x16)
UserGuide - 26-173J-GB-5B-HCDUP-ROI.indd 8UserGuide - 26-173J-GB-5B-HCDUP-ROI.indd 8 4/12/2013 10:03:00 AM4/12/2013 10:03:00 AM