User manual
2
Before using the product, please read this manual carefully. The manual is to guide your
usage of this product specially.
INTRODUCTION
We congratulate your choice of a high quality product. The instruction manual for this
product contains important information concerning safety, use and disposal. Before using
the product, please familiarize yourself with all of the safety information and instructions
for use. Only use the unit as described and for the specied applications. If you pass the
product on to anyone else, please ensure that the instruction manual is included.
Intended use
This model is a multistep battery charger (may be referred to as appliance) for charging
and charge retention of 6V or 12V rechargeable lead acid batteries of the following types:
Flooded Cell, Ca/Ca, VRLA, MF AGM or GEL with electrolyte solution.
This charger is not suitable for Lithium batteries!
The manufacturer is not liable for damage caused by improper use. The device is not
intended for commercial use and to be used indoors only.
Parts included
1 Charger; 2 types of detachable terminal lead sets [Clamp & Cigarette Lighter Plug]; 1
Instruction Booklet.
Parts description
Refer to Figure A:
1 12V 0.8A - (Program 2) 2 12V 3.8A - (Program 3)
3 12V 3.8A - (Program 4) 4 6V 0.8A - (Program 1)
5 LED reverse connection 6 LED stand-by
7 Charge display 8 Condition Bar display
9 Voltage display 10 Program selection button (MODE)
11 Charger
12 Fastening eyelets
13 Input cable lead 14 “+” pole clamp (red)
15 “-” pole clamp (black) 16 Cigarette lighter plug set
17 Output cable lead 18 SAE socket
Technical Data
Input voltage: 220-240V~50/60Hz Rated power: 60W
Rated voltage outgoing: 6V/12V Rated output current: 0.8A/3.8A
Ambient temperature:
0°C to 40°C Housing protection type: IP 65
Protection class: II/
Charging battery types: 6V lead acid battery1.2Ah-14Ah
12V Lead acid battery1.2Ah-120Ah