User manual

EN
BUTTONHOLE MAKING
AUTOMATIC BUTTONHOLE
USING BUTTONHOLE FOOT
Y
our machine offers you two different widths of bartack,
keyhole and round end buttonholes sewn by a system that
measures the size of the button and calculates the size of
buttonhole required. All of this is done in one easy step.
PROCEDURE
Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer or regular interfacing
can be used.
Make a practice buttonhole on a scrap of the fabric you
are using. Then try the buttonhole with the selected
button.
1. S
elect one of the buttonhole patterns.
2. Replace the presser foot with the buttonhole foot. (Refer to
Changing presser foot” on page 11.)
3. Insert the button into the buttonhole foot. (Refer to “Using
but
tonhole foot” above.)
4. Low
er the buttonhole lever (C) so that it drops dow
n
vertically between the stoppers (A) and (B).
()A ()B
()C
()C
()C ()C
Tab A
Tab B
Buttonhole foot
27