User manual

29
(A)
EN
GETTING READY TO SEW
Connecting the Machine to the Power Supply Foot Control
Before connecting the machine to the power supply, make sure
that the voltage and frequency of your electricity matches that of
the machine.
Fit the non-reversible plug into the cord socket and plug the
machine into the power supply.
Sewing speed can be varied by
the foot control.
The harder you press on the
control, the faster the machine
runs.
The sewing light is located behind the
face plate.
Turn the screw counter-clockwise and
remove the face plate.
• To remove..... Turn to the left
• To replace.... Turn to the right.
Sewing Light
(For E14 bilb only)
(A)