User Manual

BlauHoff BLH-5KW Battery LFP Battery User Manual

Anti-static wrist ring

Clip Pliers

Tapes

Strippers

5.1.4 Technical preparation

Electrical interface settings:

If the battery is connected to the user device directly, please

check:

✧ Whether the DC charging interface of the energy storage inverter

meets the charging voltage and current requirements in Table 1-1

Battery Pack Specifications.

✧ Whether the power of the electrical equipment matches the

parameters listed in “Table 1-1 Battery Pack Specifications”;

Security check:

Fire-fighting equipment such as portable dry powder fire

extinguishers should be available near the equipment. Do not place

dangerous materials such as flammable or explosive ones near the

battery.

5.2 Unpacking

✧ When the battery arrives at the installation site, it must be loaded

and unloaded properly and prevented from the direct sunshine and

rain. Before installation, check if there is any component missing

according to packing list attached in the packing box and check

whether the box appearance is intact;

✧ Carefully handling during the unpacking. Protect the insulated

coating on the case surface;

✧ Check the LFP battery for damage after unpacking. If there is any

damage, contact BlauHoff or your reseller.