User Manual
Table Of Contents
- Safety requirements
- Purpose
- Delivery set
- Designation key
- Technical data
- Unit design and operating principle
- Installation and set-up
- Connection to power mains and control
- Technical maintenance
- Troubleshooting
- Storage and transportation regulations
- Manufacturer's warranty
- Certificate of acceptance
- Seller information
- Installation certificate
- Warranty card
www.blaubergventilatoren.de
4
Vento Eco2 A 50 -4 L S11 Pro
Control panel
Pro: sensor control panel
Ventilation hood model
Air duct length
_: 500 mm
L: 700 mm
Internal grille type
4: white internal grille with a smooth panel
Rated air ow [m/h]
Air duct cross section
A: round
Ventilator series
Vento Eco : series with one ventilator and one control panel
Vento Eco2: series with two ventilators and one control panel
Name
Quantity
Vento Eco A50-4 Pro Vento Eco2 A50-4 Pro
Air duct 1 pc.
2 pcs.
Sound absorbing material 1 pc.
2 pcs.
Assembled cartridge 1 pc.
2 pcs.
Indoor unit 1 pc.
2 pcs.
Outer ventilation hood 1 pc.
2 pcs.
Control panel 1 pc.
1 pc.
Fastening set 1 packing
1 packing
Mounting box 1 pc.
1 pc.
User's manual
1 pc.
1 pc.
Packing box 1 pc.
1 pc.
PURPOSE
The ventilator is designed to ensure continuous mechanical air exchange in flats, cottages, hotels, cafés and other domestic and public
premises. It is equipped with a regenerator that enables supply of fresh filtered air heated by means of extract air heat energy recovery.
The ventilator is designed for installation on external walls.
The ventilator is rated for continuous operation.
DELIVERY SET
DESIGNATION KEY