Heat recovery air Handling unit KoMFort roto ec S6K 200 KoMFort roto ec S6eK 200 EN uSer’S Manual
www.blaubergventilatoren.de KoMFort roto ec S6(e)K 200 CONTENTS Safety requirements ..................................................................................................................................................................... 2 Purpose ................................................................................................................................................................................................ 5 Delivery set ..........................................
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de SAFETY REQUIREMENTS All user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical, and technical norms and standards must be observed when installing and operating the unit. Disconnect the unit from the power supply prior to any connection, servicing, maintenance, and repair operations.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls, and other utility and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream of intake air. The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with high humidity.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de TECHNICAL DATA The unit is designed for indoor application with the ambient temperature ranging from +1 °C up to +40 °C and relative humidity up to 60 % without condensation. In cold, damp rooms, there is a possibility of freezing or condensation inside and outside the casing.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de DESIGN AND OPERATING PRINCIPLE The unit has the following operating principle: stale extract air from the room flows to the unit, where it is filtered. Then the air is moved through the rotary heat exchanger and is exhausted outside with the exhaust fan. Clean air from outside is moved to the supply filter. Then filtered air flows through the rotary heat exchanger and is moved to the room with the supply fan.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de MOUNTING AND SET-UP READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT. THE UNIT MUST BE MOUNTED BY A QUALIFIED EXPERT ONLY, PROPERLY TRAINED AND HAVING THE REQUIRED TOOLS AND MATERIALS. While mounting the unit provide enough access for maintenance or repair work. The minimum recommended clearances between the unit and the adjoining walls are given in the figure below.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de DECORATIVE PANEL MOUNTING The decorative panel must be installed using the suspension brackets (included in the delivery set). Fix the suspension brackets on the decorative panel according to the drawing. R2 x 4 55 2,5 x 12 18 600 11 769 84 12 430 598 84 Install the decorative panel by inserting the brackets in special holes.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de SERVICE SIDE CHANGE The design of the unit allows changing the service side. A C D B C E E A B D A – supply air B – intake air C – extract air D – exhaust air E – extract air from kitchen hood Remove the decorative panel. Remove the service panel (fixed with 6 screws). Disconnect the ground cable from the service panel. Remove the rear panel of the unit (fixed with 6 screws). Disconnect the ground cable from the rear panel.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de UNIT INSTALLATION Attach the mounting bracket to the wall considering the wall material and the unit weight. Install the unit on the mounting bracket. Suspend it carefully. Make sure the unit is fastened securely prior to operation.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de CONNECTION TO POWER MAINS POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT. THE UNIT MUST BE CONNECTED TO POWER SUPPLY BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER’S LABEL. ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED AND WILL VOID THE WARRANTY. • • • 12 The unit is rated for connection to 1~230 V/50 (60) Hz power mains according to the wiring diagram.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de TECHNICAL MAINTENANCE DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! MAKE SURE THE UNIT IS DISCONNECTED FROM POWER MAINS BEFORE REMOVING THE PROTECTION Maintenance operations of the unit are required 3-4 times per year. They include general cleaning of the unit and the following operations: 1. Filter maintenance. Dirty filters increase air resistance in the system and reduce supply air volume.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de TROUBLESHOOTING IF UNIDENTIFIED NOISES OR ODOURS SHOULD ARISE AND IN CASE OF DEFORMATION OF ELEMENTS, VIBRATION, TERMINATION OF AIR SUPPLY/EXTRACTION OR REDUCED SYSTEM PERFORMANCE, IMMEDIATELY DISCONNECT THE UNIT FROM POWER SUPPLY AND CONTACT THE SELLER FOR THE VENTILATION SYSTEM DIAGNOSTICS. DIAGNOSTICS MUST BE CARRIED OUT BY QUALIFIED SPECIALISTS.
www.blaubergventilatoren.de KoMFort roto ec S6(e)K 200 STORAGE AND TRANSPORTATION REGULATIONS • • • • • • • 16 Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range +5...+40 ˚C and relative humidity up to 70 %. Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing deformation.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC.
www.blaubergventilatoren.
KoMFort roto ec S6(e)K 200 www.blaubergventilatoren.de CERTIFICATE OF ACCEPTANCE Unit Type Heat recovery air handling unit Model Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are acknowledged and accepted.
www.blaubergventilatoren.
