Tus neeg siv phau ntawv
Table Of Contents
- Safety requirements
- Purpose
- Delivery set
- Designation key
- Technical data
- Design and functioning
- Mounting and set-up
- Connection to power mains
- Technical maintenance
- Troubleshooting
- Storage and transportation regulations
- Manufacturer’s warranty
- Certificate of acceptance
- Seller information
- Installation certificate
- Warranty card
Designation example: Iso 160- 2 E G1 __
Fan name
Iso – centrifugal fan in sound insulated casing
Outlet spigot diameter [mm]
Number of poles
Power mains specications
E – single phase
Options
FR1 – integrated speed controller
GI1 – speed controller with an electronic thermostat and a temperature sensor integrated inside
an air duct. Temperature-based operation logic
G1 – speed controller with an electronic thermostat and an external temperature sensor.
Temperature-based operation logic
GTI1 – speed controller with an electronic thermostat and a temperature sensor integrated
inside an air duct. Timer-based operation logic
GT1 – speed controller with an electronic thermostat and an external temperature sensor. Timer-
based operation logic
GSI1 – speed controller with an electronic thermostat and a temperature sensor built into the
duct. Algorithm for turning on and off by temperature.
GS1 is a speed controller with an electronic thermostat and an external temperature sensor.
Algorithm for turning on and off by temperature.
Power [V/Hz]
_ - 230/50 (default)
Voltage/Frequency
NAME NUMBER
Fan 1 pc.
User’s manual 1 pc.
Packing box 1 pc.
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE
TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORISED
ACCESS BY UNATTENDED CHILDREN.
The centrifugal fan in sound insulated casing is designed for supply and exhaust ventilation of domestic, public and industrial premises
with high requirements to the noise level and with limited space for mounting.
The unit is rated for continuous operation.
The unit is a component part and is not designed for stand-alone operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).
PURPOSE
DELIVERY SET
DESIGNATION KEY
www.blaubergventilatoren.de
Iso
5