User`s manual
68
FUSE REPLACEMENT
NOTE:
Always switch the ignition off before fuse replacement. Never try
to repair any blown fuses. We recommend that you keep spare
fuses with you at all times. In case of frequent fuse burns have the
electric system checked by an authorised Blata service centre.
Fix the fuel tank side cover. Never tighten the xing bolts to ex-
ceed the prescribed tightening torque.
Tightening torque: 1.5 Nm (1.11 lbf.ft)
Replace the low beam and
choke fuse situated on the
conductor inside housing.
Low beam and choke fuse:
10A
Remove the 3 bolts out of the
front right cover of fuel tank
and remove this cover.
Or disconnect the starter re-
lay connector and replace the
main fuse situated on the star-
ter relay body.
Main fuse: 20A