User`s manual

61
HEADLIGHT
SIDE STAND
Fit th e f ro nt h ea dlight c ove r and
secure it with 3 bolts provided.
Insert droppers between the
headlight bracket and cover on
2 bolts distance. Hook the bra-
ke uid pipe into the bracket on
the left hand side.
Support the motorcycle set onto a at surface.
Check the side stand springs for possible damage and loss of
tension. Check the stand mechanism for its smooth operation
and lubricate the stand pivot, if required.
Check the ignition disconnecti-
on system on the side stand:
Sit on the motorcycle and lift
the side stand.
Start the engine, with gearbox
set to idle, then shift to any gear
with the clutch depressed.
Tilt the side stand all the way
down and try to ride away.
With the side stand fully dep-
loyed, the engine is supposed
to stop.
If the engine does not stops,
the system has encountered a
problem, which requires repair
by an authorised Blata service
centre.