User`s manual

HEADLIGHT

NOTE:

Both the high and low beam cast by the main headlight can be

adjusted independently. The adjustment procedure is identical

for either beam. Set the main headlight to comply with the valid

local laws and regulations.

Set the motorcycle in vertical

position on a at surface.

Unscrew the 3 xings bolt on

the front headlight cover. Re-

move the cover and disconnect

the position light terminal.

Loosen bolts on both sides of

the headlight and set the light

body into suitable position.

Tighten the bolts on both sides

of headlight to ensure its cor-

rect position.

Check the headlight for correct

adjustment.