User`s manual
59
DRIVE CHAIN
BRAKING SYSTEM
If the chain slack is too high, have the whole chain kit replaced
(drive chain, front and rear sprockets) by an authorised Blata
service centre. Check both sprockets and chain for possible
damages or excessive wear. In case of any deciencies ob-
served have the whole chain kit replaced (drive chain, front and
rear sprockets) by an authorised Blata service centre. Check all
the bolts in sprockets for loose items. In case of any loose bolt
seek an authorised Blata service immediately.
For your own safety, we recommend have the braking system
serviced and maintained by an authorised Blata service centre.
Check the brake uid level before every ride and change the uid
at least once in two years.
If the brake uid level is very low, or if the uid has been used for
a very long period, have the uid topped up or even changed by
an authorised Blata service centre.
Check the brake uid level (page 27).
Check the thickness of brake shoe lining (page 28).
Check the braking system (page 59).
Depress the brake lever or pedal and check, whether the brake
light turns on at the moment of brake engagement. If that is not
the case, have this defect removed by an authorised Blata ser-
vice centre.