User`s manual

IDLE RUN

Checks and adjustment of idle run shall be performed after ev-

ery engine maintenance procedure and in accordance with the

Maintenance Plan (page 49).

Once the idle run has been adjusted properly, the engine shall be

warmed up to its service temperature (for approx. 10 minutes)

Check the engine idle run.

Idle run: 1.600 ± 100 min

-1

(r.p.m.)

NOTE:

If you do not succeed in adjusting the idle run revolutions or if

these are irregular, contact an authorised Blata service centre.

In case the engine requires

further adjustment, set the

idle run using the throttle stop

screw.

Open the choke valve 2 - 3

times and re-check the idle run

revolutions.