User`s manual

FUEL SYSTEM

Remove the seat.

Unscrew the 3 bolts from the

front left and right tank covers

and remove these covers.

Unscrew the 3 xing bolts on

the fuel tank and lift the tank up

slightly.

Check all the fuel, vacuum and

pneumatic tubes for possible

deterioration, damage or leaks.

(A) Automatic vacuum valve

(B) Vacuum tube

If you nd any of the parts out of order or showing signs of leaka-

ge, have it replaced at an authorised Blata service.

Re-t the fuel tank to its initial position and tighten it using the

3 bolts provided. Beware to conduct the installation without any

damage or strangulation of pipes.

Fit the left and right fuel tank covers. When tightening the bolts,

always obey the prescribed torque.

Tightening torque: 1.5 Nm (1.11lbf.ft)