User`s manual

MAINTENANCE SAFETY

Any works on the motorcycle shall be conducted in compliance

with instructions contained in this Manual and relevant safety war-

nings. The description of procedures contained in this chapter has

been based on the assumption you poses the basic technical skills

as well as the essential knowledge of workshop safety.

The Manual cannot cover all the risks related to the operation and

maintenance of the motorcycle. You shall be governed by the com-

mon sense in many cases. First of all, you should never over-esti-

mate your skills with respect to particular tasks.

Before you start with any work, stop the engine and set the motor-

cycle into stable servicing stand on straight surface.

Caution! The vehicle exhaust contains toxic carbon gases, which

might cause loss of consciousness resulting in death. The engine

shall be started within open areas only or closed premises provided

with proper ventilation only.

Before conducting any work, let the engine cool down properly to

prevent any burns or ignition caused by hot components.

Never start the engine, unless directed to do so by relevant instruc-

tions, to avoid the risk of injury by moving parts.

Never use the motorcycle with any of its parts dismantled.

If your motorcycle has fallen down or suffered an accident, ask your

Blata dealer for inspection of the main motorcycle parts even thou-

gh you are capable to perform some repairs independently.

Always remember that you Blata dealer or authorised service

centre possesses better knowledge of your vehicl e as well as pro-

fessional equipment and facilities for service or maintenance.

Any failure to perform the main-

tenance or inspection of the ve-

hicle properly might result in ac-

cidents with subsequent lethal

injuries or even death.

Any failure to follow the instruc-

tions contained in this chapter

and obey the safety warnings

provided might result in serious

personal injuries or even death.

WARNING WARNING