User`s manual

MAINTENANCE INSTRUCTIONS

Regular maintenance and checks before ride are the essential

prerequisites for safe and operable condition of your motorcycle.

We recommend that the service and maintenance activities be

performed by your Blata service centre equipped with the tools

and experienced well-trained personnel as required.

Any regular maintenance conducted within the warranty period

shall be performed by an authorised Blata service centre only

and the completion shall be recorded in vehicle log book. Failure

to follow these procedures will void the warranty.

When using the motorcycle mostly off the road, in dusty, muddy

or wet environment, consult your Blata dealer for the option of

more frequent service inspections and reduction of the regular

maintenance intervals.

If you decide to perform the regular maintenance and general

care of the vehicle independently, following the instructions in

this chapter, make sure you possess the technical facilities,

knowledge and skills necessary. Remember that any service or

maintenance activities performed besides an authorised Blata

service will render your warranty void!

Regular maintenance activities, which require special equipment

or special training, have not been included in this Manual. These

shall be performed by an authorised Blata service centre only.

Use original Blata spare parts supplied or recommended by the

Blata company. You shall also use only lubricants or their equiva-

lents as recommended by the Blata company. Any use of unsuit-

able parts or lubricants might damage your motorcycle.

Before any repairs or disassembly of engine components, remo-

ve any dirt, mud or junk from the vehicle.

When conducting motorcycle repairs, use metric tools only. Met-

ric bolts, nuts and threads can never be mistaken for the inch

ones (USA, GB).

When performing installation or assembly activities, always use new

gasket, O-rings, cotter pins, self-locking nuts and lock washers only.

Once you have completed the assembly, check all the parts for

proper installation and operation.