User`s manual

33
LIGHTING AND CONTROLS
Check all the lighting and control featured before every ride.
Turn the key inside the switch box (2) to switch the ignition on.
Shift the transmition to idle.
Light up features:
- front and rear position lights
- registration plate light
- blue display backlight
- idle green control indicator (N = neutral)
Check the function of:
- turn signal lights and green turn signal indicators
- horn
- high beam and the blue control indicator of high beam
- light asher
- braking light (when the front and rear brakes are used)
start the engine:
- once the engine has been started up, low beam will be turned on
Use the ignition stop button to stop the engine.
NOTE:
In case any of the blinkers fails to ash and remains lit up con-
tinuously, it indicates defect to be repaired.
In case of failure of any of the lighting or control features on
your bike ask your Blata dealer for assistance.
NOTE:
Adjustment of headlights shall always comply with local laws
and regulations (str. 60). Ask you Blata dealer for advice.
Sit on the motorcycle and check, adjust if required, the sight in
rear mirrors.