User`s manual
28
Check the brake shoe lining
thickness. It shall never be
less than the dened limit.
Thickness of brake pad lining
shall be checked visually from
the top front side, for the front
brake and from the rear, for
the rear brake.
Minimum thickness of brake
pad lining: 2 mm (0.08 in)
In case the thickness of bra-
ke shoe lining does not meet
this limit, have it replaced by
an authorised Blata service
centre.
NOTE:
The brake uid level drops due to the brake shoe lining wear.
The brake uid shall be changed at least once in two years.
Check the whole braking system for its sound condition and
possible signs of damage or leakage. In case of any defects
found seek assistance of your Blata dealer.
For your own safety, have any
works on the braking system
conducted by an authorised
Blata service.
WARNING
BRAKES