Technical data

Operating Manual BDC 1216

Maintenance

You should also stock all spare or wear parts that cannot be supplied

quickly. As a rule, production standstill periods are more expensive

than the cost for the corresponding spare part.

Screws that have been removed must be replaced with those of the

same quality (strength, material) and design.

Prior to any repair works on the dust collector and its drives, secure

the dust collector against unintentional switching-on. Pull out the

mains plug in order to do this.

7.4 Replacing the Filter bag

 Switch off the dust collector and then unplug the mains plug.

Safety off position

 Release stop ’A’ , unscrew filter shaker knob ’B’ and remove

head ’D’

 Release the both locking hooks (C), lift the filter ’E’ and

unscrew the clamp ’F’ that holds the filter on the bearing ring ’G’

 Unscrew cage “H” and overturn the filter, exposing coupling

clamp “I”

 Release the clamps and detach the cage from the filter.

 Dispose of the filter according to the laws in force.

 Fit the new filter and secure it in the cage with special clamps

 Assemble the components in the reverse order of disassembly.