Technical data

BDC 1216 Operating Manual
Maintenance
7.2 Maintenance and inspection liste
Operating hours/
time period
Inspection points, maintenance
instructions
12 h after repairing
Check all safety devices working adequate.
Check all accessible screw connections for
tight seat.
Daily and prior to
starting work
Check the hose connections for tightness and
fixed seat.
Check the hose to the filter for damages.
Make sure that the dust bin of the filter is
emptied.
Check the electric connections for sediments
of dirt or foreign bodies.
Check the electric motors for dirt and other
contaminants.
Annually Full overhaul and cleaning of the complete
dust collector.
7.3 Repairing
As already mentioned in Chapter 5 “Initial operation” we recommend
to execute the first repair works on the dust collector having support
of Blastrac personnel. Doing this together, your maintenance
personnel gets the opportunity to be trained intensely.
We will describe only regular maintenance works that could occur
within the bounds of regular maintenance or work that is required to
replace wear parts.
If you replace parts yourself for specific reason, the following
instructions and work sequence have to be observed.
3