Technical data

BDC 1216 Operating Manual
General
All connection points must be sealed carefully and the dust hose
must be fixed with hose clamps!
The filter housing must be sealed properly and all sealings must
be in good condition!
If dust leaves the dust collector instead of clean air, this is a sign
that the Filter bag is either damaged or not fixed correctly inside
the filter housing.
The air streams through the dust collector as follows:
 The air stream then flows through the approx. 10 m long flexible
dust hose taking dust and fine particles with it.
 The air stream now enters the filter housing of the dust collector
where the dust and the fine particles are separated from the air.
The cleaned air is then fed into the environment again.
Fig. 3.2
5