Technical data

Operating Manual BDC 1216
Safety advice
Only operate the dust collector when all safety devices and
related safety equipment, e.g. detachable safety devices,
emergency stops, sound insulations and suction devices are
present and operational!
Check the dust collector visually for any damage and defects at
least once a day!
In the event of operational malfunctions the dust collector must be
shut down immediately and secured! The faults must be
immediately rectified!
Secure the work area around the dust collector in public areas
providing a safety distance of at least 2 m from the dust collector.
Before switching on the dust collector make sure that no-one can be
endangered when the dust collector starts up!
Do not switch off or remove the exhaust and ventilation devices when
the dust collector is running!
All persons in the proximity of the dust collector, when it is working,
must wear safety glasses with lateral protection and safety shoes.
The operator is obliged to wear close-fitting protective clothing.
Use only extension cable for extending the main cable that are
sized and marked in accordance with the overall power
consumption of the machine and the valid VDE guidelines.
2.5 Special work within the scope of use of the dust collecto
r
and maintenance activities as well as repairs during
operation
Mechanical servicing work:
Put the machine in the Safety off position as described in chapter
2.6 for any servicing work on the machine in order to prevent the
machine from being switched on accidentally.
6