Use and Care Manual

BL-183 / BL-233 SANDER/POLISHER
SECTION 8
MAINTENANCE
INSTRUCTION MANUAL
OCTOBER 2008
Operational safety and service life of the machine depend, among other things,
on proper maintenance.
After use, check the tool to make sure that it is in top condition.
It is recommended that you take this to a Blastrac Authorized Service Center for
a thorough cleaning and lubrication at least once a year.
Do not make any adjustments while the motor is in motion.
Always disconnect the power cord from the receptacle before changing
removable or expendable parts (blade, bit, sanding paper, etc.), lubricating
or working on the unit.
WARNING! To ensure safety and reliability, all repairs should be performed
by an AUTHORIZED SERVICE CENTER or other QUALIFIED SERVICE
ORGANIZATION.
Special attendance and regular maintenance of the machine are imperative for
functioning and safety.
Pay attention to unusual noises or strong vibrations. Check for the cause of every
big change. Call a technician if you have doubts about the cause or when a
repair without a technician does not seem possible without damages.
Before using the machine you should always check all screws and connection
points for correct seating.
Due to different working conditions it cannot be foreseen how frequently
inspections for wear checks, maintenance and repair work should be carried out.
Prepare a suitable inspection schedule considering known working conditions
and experience.
Our specialists will be happy to assist with more advice.
Please call 1-800-256-3440.
8.1 CARE AND MAINTEN
A
NCE