Use and Care Manual

BL-183 / BL-233 SANDER/POLISHER
SECTION 4 ADDITIONAL SAFETY RULES
INSTRUCTION MANUAL
OCTOBER 2008
c) When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may create
a risk of electric shock or injury.
Mechanical servicing work:
a) Put the machine in the Safety off position as described below before
carrying out any servicing work on the machine in order to prevent the
machine from being switched on accidentally.
b) Follow any special safety instructions in sections on servicing the
machine. See Section 7.
c) Adjustment, servicing and inspection work on the period of time
limits, specified in these Operating Instructions as well as any information
on the replacement of parts and equipment must be undertaken and/or
complied with!
d) These activities may only be undertaken by qualified personnel.
e) Do not use any aggressive cleaning materials! Use lint-free cleaning
cloths! The operator must be given information about maintenance
and work procedures, before starting the cleaning process!
f) Always tighten any screen connections that are undone during servicing
and maintenance work!
g) If safety devices need to be dismantled during setting up, servicing and
repairs, these safety devices must be reinstalled and inspected
immediately after completion of the servicing and repair work.
h) Make sure that process materials and replaced parts are disposed of
safely and in an environmentally-friendly manner!