SDS
11/182020
EN (English)
Page 3
General information:
Not expected to be health hazard if used under normal conditions
Inhalation: Under normal conditions of intended use, this material is not expected to be inhalation
hazard. If some symptom exists, remove to fresh air. If not breathing, give artificial respiration. Get
medical attention
Skin Contact: Remove contaminated clothes. Flush exposed area with plenty of water followed by
washing by soap, if available. If persistent irritation occurs, obtain medical attention. If product is
injected into or under the skin due to any reason, the victim, regardless of size or appearance of
wound, victim should be brought immediately to medical attention for emergency surgical needs.
Though the initial symptoms due to high pressure injection may be minimal / absent, early surgical
treatment may significantly reduce the extent of injury.
Eye Contact: Immediately flush with large quantities of cool water for at least 15 minutes including
under eyelids. Keep eye wide open while rinsing. If symptoms persist get medical attention.
Ingestion: Drink plenty of water. In general no treatment is necessary unless large quantities are
swallowed; however, it’s advisable to take medical attention. Do not induce vomiting unless directed by
medical personnel. Do not give anything by mouth by
an unconscious person.
Most Important Symptoms /Effects Acute and Delayed:
Most important symptoms / effects: No information available
Indication of Immediate Medical Attention and Special Treatment Needed , If Necessary :
Note to Physician:
Treat symptomatically
Self-protection for first aider: When administering the first aid, ensure that you are wearing the
appropriate personal protective equipment according to the incident, injury and surroundings.
SECTION 5: FIRE FIGHTING MEASURES
5.1 Extinguishing Media:
Suitable extinguishing media: Water Spray (fog), dry chemical, foam, or carbon dioxide, sand to
extinguish flames.
Unsuitable extinguishing media:
Water stream may splash burning liquid and spread fire.
5.2 Special hazard arising from the substances or mixture: Hazardous combustion product may
include a complex mixture of airborne solid and liquid particulates and gases (smoke) , carbon
monoxide , unidentified inorganic and organic compounds
.
Explosion Data:
Sensitivity to Mechanical Impact: None
Sensitivity to Static Discharge: None
5.3
Advice to firefighters:
Proper protective equipment include chemical resistant gloves to be worn,
chemical resistant suit is recommended when large contact with spill product is expected. Self-
contained breathing apparatus (SCBA) must be worn when approaching a fire in confined area. Select
the fire fighters clothing approved by relevant standard e.g., MSHA/NIOSH approved or equivalent and
full protective gear .