Specification

FIRST AID MEASURES
4
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Continuie to monitor. Get medical attention.
Inhalation:
Remove contaminated clothing immediately! Wash skin with soap and water. If irritation develops,
seek medical attention.
Skin Contact:
Flush eye(s) with water for 15 minutes. Get medical attention. If eye irritation presists, obtain
medical treatment.
Eye Contact:
Do not induce vomiting.! Get medical attention immediately!Ingestion:
FIRE FIGHTING MEASURES
5
Flashpoint: 169
0
F (TCC)
Extinguishing Media:
Dry chemical. Carbon dioxide, halon or foam.
ACCIDENTAL RELEASE MEASURES
6
Spill or Leak Procedure: In case of spill or release, avoid vapors and ignition sources. Use appropriate protective
equipment. Stop and contain the discharge if it can be done safely. Keep out of drains and waterways. Handle with trained
personnel only. Notify authorities as required by law.
Waster Disposal Method: Can and contents can then be incinerated. Dispose of in accordance with local, state and federal
regulations.
HANDLING AND STORAGE
7
Use in accordance with good industrial workplace practices. Avoid unnecessary contact.
Wash thoroughly after handling. Use with good ventilation.
Handling Precautions:
Store in a dry place away from excessive heat. Store containers with lids on and properly
labeled.
Do not store at temperatures above 120 degrees F.
Storage Requirements:
Silicone Lube
Material Safety Data Sheet
Revision Date: 08/25/08MSDS Number: SL - Bulk
Page of
2 5
MSDS
The Blaster Corporation