SDS

STARTING FLUID
Page: 1/7
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
Product identifier
Chemical Name
Mixture
CAS No.
Mixture
Trade Name
STARTING FLUID
Product Code
16-SF
Relevant identified uses of the substance or mixture and uses advised against
Identified Use(s)
Engine starting aid
Uses Advised Against
None
Company Identification
The Blaster Corporation
8500 Sweet Valley Drive
Valley View, Ohio 44125
www.blastercorp.com
Telephone
[phone]
Fax
[phone]
Emergency telephone number
Emergency Phone No.
Transportation Emergency: CHEMTEL [phone]
SECTION 2: HAZARDS IDENTIFICATION
Note: This product is a consumer product and is labeled in accordance with the US Consumer Product
Safety Commission regulations which take precedence over OSHA Hazard Communication labeling. The
actual container label will not include the label elements below. The labeling below applies to
industrial/professional products under OSHA Hazard Communication labeling .
Classification of the substance or mixture
OSHA HCS (29 CFR 1910.1200)
Flam. Aerosol 1; Gases Under Pressure: Dissolved gas; Carc. 2; Skin Irrit. 2;
STOT SE 3; Asp. Tox. 1
Label elements
Hazard Symbol
Signal word(s)
DANGER
Hazard Statement(s)
Extremely flammable aerosol.
Contains gas under pressure; may explode if heated.
May cause cancer.
Causes skin irritation. Repeated exposure may cause skin dryness or
cracking.
May cause drowsiness or dizziness.
May be fatal if swallowed and enters airways.
Precautionary Statement(s)
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not spray on an open flame or other ignition source.
SAFETY DATA SHEET
OSHA HCS (29 CFR 1910.1200)