Specification

Product Name: Corrosion Stop
Product Code: 16-CSP
Date: 1/6/16
Total pages: Page 4 of 7
4
Handling:
Store below 120°F in cool, dry area, out of direct sunlight and away from strong oxidizers. Do not
puncture or burst. Use in accordance with good work place practices. Use with adequate ventilation. Keep
containers closed when not in use. Always open containers slowly to allow any excess pressure to vent.
Avoid breathing vapor. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water
after handling. Decontaminate soiled clothing thoroughly before re-use. Destroy contaminated leather
clothing.
Empty containers may contain residues from the product. Treat empty containers with the same precautions
as the material last contained. Do not cut, weld or apply heat to empty containers Do not incinerate
Storage:
Store in a cool, dry area, away form heat or direct sunlight. Keep containers closed when not in use. Do not
store with incompatible materials
Protective Equipment:
Use synthetic gloves if necessary to prevent excessive skin contact. Do not wear contacts and
always use ANSI approved safety glasses or splash shield.
Engineering Controls:
General or dilution ventilation is frequently sufficient as the sole means of controlling employee
exposure. Local ventilation is usually preferred. Use a NIOSH approved respirator if ventilation is
not adequate to maintain exposures below TLV levels.
Respiratory Protection:
Use adequate ventilation to maintain exposure limits. If the exposure limits of the products or
any of its components is exceeded, an approved organic vapor mask should be used (consult your
safety equipment supplier). Above exposure levels an approved self-contained breathing
apparatus or airline respirator with full face-piece is required
Other Suggested Equipment:
Eye wash station and emergency showers should be available. Spill containment equipment should
be available.
Discretion Advised:
We. take no responsibility for determining what measures are required for personal protection in
any specific application. The general information should be used with discretion.
xposure guidelines:
Ingredients
Petrolatum
CAS #
8009-03-8
Percent
25-35 %
Exposure Limits
ACGIH (TWA) 5mg/m3 (1)
n-Heptane 142-82-5 25-35% OSHA (TWA 500 ppm
ACGIH (TWA) 400 ppm
Acetone 67-64-1 25-35%
OSHA (PEL) 1000 ppm
ACGIH (TLV) 500 ppm
7. Handling and Storage
8. Exposure Controls / Personal Protection